RoboVac Ramp (Paintable) - Baby Gates and Room Transitions

[Order Status]
Feel free to ask for a order status link, I'll send you a link via "Click Up" to help view your order project in real-time.

【DO NOT ORDER A "CUSTOM SIZE" WITHOUT CONTACTING ME FOR A QUOTE FIRST.】  
**Orders will be CANCELED if a quote was never issued** 

*Please Read Before Ordering (I understand there is a lot, please feel free to ask me questions):

1. Custom Orders DO NOT QUALIFY for returns per my and Etsy's policy, please contact me with any issues you may have with the print, If the order has not been printed, cancellations are still possible.

2. Maximum Custom Height is 3 inches (7.62 cm)(76 mm) with a Depth of 9.5in
- Double-sided 3m tape comes with a ramp to help stick to the floor

3. Custom Ramp Request Requirements (MEASURE MEASURE MEASURE!)
- Height and Width required (depth is optional, as one will be recommended.) The ramps will come in 2+ pieces based on the width. Sending me photos with a measuring tape can also help.
- Measurements for the vacuums Front bumper to floor
- The distance from the front bumper to the 1 small front wheel (if it has one) if not then either of the 2 wheels of the vacuum.

Standard size ramp Returns do not qualify for free returns. Buyers will need to pY for return shipping.

************************************************
WARNING: The Ramps are structured to support the weight of most robo vacuums ONLY. They can support light stepping or walking over them.  

【DETAILS & RAMP OPTIONS BELOW】

- Colors - If you require a color that's not available, please let me know and we can discuss what colors you need, new colors might add to the cost. These are paintable with any type of acrylic as seen in the first photo.

- Custom Sizes- The ramp can be customized to fit most paths, preventing your Robo Vac from hitting the bumper and getting stuck. I can add cutouts in the back to help with almost any type of molding. They will come with standard flat backs unless I am told otherwise.

- Double-sided Adhesive- The double-sided adhesive on the bottom of the ramp will hold it in place on most surfaces, including carpet and hardwood.

- Smooth Transition- The ramp provides a smooth transition for your Robo Vac to go over obstacles, making it great for baby gates as well.

- Baby Gate Ramps - I will need the thickness of the middle bar and height to help create a bridge that connects both sides of the ramp. based on the height of the gate, this might not be possible

*SAMPLE (Size Needed): a single sample piece at 1in wide,  please send me the required height measurement prior to ordering or it will be canceled. Sample size order costs will also be used to discount the full order if purchased.

*QUOTED PRICE ## (Custom with a number)  - Is linked to the cost from the quote that is issued after measurements are sent to me. Contact me first prior to purchase or the order will be canceled. Quoted Prices are honored for up to 1 year

*All Ramps are paintable with - Spray Paint, Acrylic, and Wall Paint

*All Costs are in USD but Etsy will do the conversion at checkout

*COLORS: Some colors like BLACK might not be seen by vacuum sensors, consult your vacuum manual / FAQ for issues with dark or light colors.

************************************************

*Depth Notice & Measurement*
Please be aware that the depth may vary due to how steep the ramp may be and the type of vacuum being used. Based on how close the front bumper is to the ground the ramp may need to have the depth increased. For example, Roomba j7 series vacuums are very close to the ground, because of this, any ramp over an inch typically needs to be extended to 5-7 inches in depth/slant for it to use the ramp properly. The vacuum used in the video is a Eufy H70.

*Send me measurements from front bumper to floor and front bumper to front wheel/wheels.

Similar Vacuums:
- Roomba j7+
- RoboRock 
- Roomba S9+
- Roomba 9

----------Please Read Below-------------
*Colors may vary based on the material supplier.

**VIEW SHOP POLICY BELOW THE DESCRIPTION - Custom Orders do not qualify for returns, please contact me with any issues you may have with the print

**Hand Wash Only

🛠️ Please Note:
Due to the nature of 3D printing, slight surface marks, color variations, or minor imperfections may occur. These are considered normal and part of the handcrafted process. Every unit is carefully inspected for quality before shipping.

⏳ Made to Order – Lead times may vary depending on current demand.

📸 Follow me on Instagram for deals & behind-the-scenes looks:
@c3dprints_official

The plastic is a Polylactic acid, a biodegradable plastic, commonly used in 3D printing.